latinica | ћирилица | english
Poslednja izmena: 12/05/2019
   


Prijava i registracija



Registrujte se da bi ste imali mogućnost pristupa elektronskim izdanjima SMEITS-a


Program SMEITS-a

Skupština SMEITS-a

28. marta 2018. godine držana je 30. Skupština SMEITS-a. Usvojen je Izveštaj o radu  SMEITS-a za 2017. i plan rada za 2018. godinu. 

Medalja "Branislav Đaković" dodeljena je
prof. dr Aleksandru Petroviću, dipl. maš. inž.


 

 

Processing ’19 is the thirty-second international congress on process industry organised by the Society for Process Engineering within SMEITS (Serbian Union of Mechanical and Electrical Engineers and Technicians), in cooperation with the Faculty of Mechanical Engineering of Belgrade, the Department of Process Engineering. Processing’19 will be held in Sava Centre, in Belgrade on 30th and 31st May 2019. This year’s programme will be focused on CO2 emissions from industrial plants, renewable energy sources: biomass, hydro energy, and solar energy, and their environmental impacts.

SMEITS Society for Process Engineering
 

undefined

Department of Process Engineering
Faculty of Mechanical Engineering,
Belgrade University

Serbian Chamber of Engineers
Belgrade

Programme supporters

 

undefined  

Faculty of Organizational Sciences, University of Belgrade,
Belgrade, Serbia

 

undefined  

Faculty of Technical Sciences,
University of Novi Sad,
Novi Sad, Serbia

 

undefined  

Departement for Energetics and Process Engineering
Faculty of Technical Sciences
University of Novi Sad,
Novi Sad, Serbia

 

undefined  

Military Technical Institute,
Belgrade, Serbia

undefined  

Faculty of Technology
University of Novi Sad,
Novi Sad, Serbia

 

 

Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia

 

 

Faculty of Technology and Metallurgy, University of Belgrade, Belgrade

 

undefined  

Faculty of Management
Sremski Karlovci
University "Union - Nikola Tesla"
Belgrade
 

 


The 32nd Processing is financialy supported by the
Ministry of Education, Science and Technological Development
of the Republic of Serbia 

undefined  

Media Sponsor

undefined
 

 

Sponsors

             undefined

 
        
 gasteh        

Media Sponzor 


undefined 
  

International Scientific Committee 

  • Aleksandar Petrović, Ph.D., Department of Process Engineering, Faculty of Mechanical Engineering, Belgrade
  • Marjan Arsović, Ph.D., SafBon Water Technology, Inc., Tampa, Florida, USA
  • David Bolzonella, Ph.D., Department of Biotechnology, University of Verona, Italy
  • Ivan Božić, Ph.D., Department for Hydraulic Machinery and Energy Systems, Faculty of Mechanical Engineering, Belgrade
  • Dr. Adrian Ciobala, Facultatea de Mecanica, Universitatea Politehnica Timisoara, Romania
  • Nenad Ćuprić, Ph.D., Faculty of Forestry, University of Belgrade
  • Aleksandar Dedić, Ph.D., Faculty of Forestry, University of Belgrade
  • Katarina Dimić Mišić, Ph.D., School of Chemical Engineering, Aalto University, Finland
  • Mirko Dobrnjac, Ph.D., Faculty of Mechanical Engineering, Banja Luka, Bosnia and Herzegovina
  • Maja Đolić, Ph.D., Institute for Nuclear Sciences Vinča, University of Belgrade
  • Francesco Fatone, Ph.D., Marhe Polytechnic University, Italy
  • Nicola Frison, Ph.D., Department of Biotechnology, University of Verona, Italy
  • Milan Gojak, Ph.D., Department of Thermal Engineering, Faculty of Mechanical Engineering, Belgrade
  • Dušan Golubović, Ph.D., Faculty of Mechanical Engineering, University of East Sarajevo, B&H
  • Dragan Govedarica, Ph.D., Faculty of Technology, University of Novi Sad
  • Atif Hodžić, Ph.D. , Technical Faculty Bihać, Bosnia and Herzegovina
  • Dr Mara de Joannon, Istituto di Ricerche sulla Combustione IRC-CNR, Naples, Italy
  • Evina Katsou, Ph.D., College of Engineering, Design and Physical Sciences, Brunel University London, England, United Kingdom
  • Filip Kokalj, Ph.D. , Faculty of Mechanical Engineering, University of Maribor, Slovenia
  • Dorin Lelea, Ph.D., Facultatea de Mecanica, Universitatea PolitehnicaTimisoara, Romania
  • Aleksandar Marinković, Ph.D., Faculty of Technology and Metallurgy, Belgrade
  • Ljiljana Medić Pejić, Ph.D., Universidad Politécnica de Madrid, Madrid, Spain
  • Branislava Nikolovski, Ph.D., Faculty of Technology, Novi Sad
  • Goran Orašanin, Ph.D., Faculty of Mechanical Engineering, Department of Thermal Power Engineering and Process Mechanical Engineering, University of East Sarajevo, B&H
  • Sanja Petronić, Ph.D., Vinča Institute for Nuclear Sciences, University of Belgrade, Belgrade
  • Dejan Radić, Ph.D., Department of Process Engineering, Faculty of Mechanical Engineering, Belgrade
  • Jelena Rađenović, Ph.D., Catalan Institute for Water Research Foundation (ICRA), Spain
  • Ivan Rajšl, Ph.D., Faculty of Electrical and Computer Engineering, University of Zagreb, Zagreb, Croatia
  • Jelena Rusmirović, Ph.D., Military Technical Institute, Belgrade
  • Stojan Simić, Ph.D., , Faculty of Mechanical Engineering, University of East Sarajevo, Bosnia and Herzegovina
  • George Skevis, Ph.D., DIC, Principal Researcher Aerosol & Particle Technology Laboratory, CERTH/CPERI, Thessaloniki, Greece
  • Pavle Spasojević, Ph.D., Faculty of Technical Sciences of Čačak, University of Kragujevac
  • Vladimir Stevanović, Ph.D., Department of Thermal Engineering, Faculty of Mechanical Engineering, Belgrade
  • Dragiša Tolmač, Ph.D., Technical Faculty “Mihajlo Pupin, Zrenjanin
  • Milovan Živković, Ph.D. , Cappoto Build, Belgrade
  • Rade Karamarković, Ph.D., Faculty of Mechanical and Civil Engineering, Kraljevo
  • Mirjana Kijevčanin, Ph.D., Faculty of Technology and Metallurgy, Belgrade
  • Mirjana Stamenić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Dušan Todorović, Ph.D., Department of Process Engineering, Faculty of Mechanical Engineering, Belgrade
  • Branka Radanov, Ph.D., Directorate of Measures and Precious Metals
  • Mladen Đurić, Ph.D., Faculty of Organisational Sciences, Belgrade
  • Dunja Sokolović, Ph.D., Department for Energetics and Process Engineering, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
  • Zoran Stević, Ph.D., Faculty of Electrical Engineering, Belgrade
  • Dragana Radovanović, Ph.D., Innovation Centre of the Faculty of Technology and Metallurgy, Belgrade
  • Aleksandra Jelić, Ph.D., Stadtwerke Dachau, Dachau, Germany
  • Simon Malamis, Ph.D., School of Civil Engineering, National Technical University of Athens, Greece
  • Ana Rita Lado Teixeira Ribeiro, Ph.D., Department of Chemical Engineering, Faculdade de Engenharia da Universidade do Porto (FEUP), Portugal
  • Vitor Jorge Pais Vilar, Ph.D., Department of Chemical Engineering, Faculdade de Engenharia da Universidade do Porto (FEUP), Portugal

Organising Committee 

  • Srbislav Genić, Ph.D. , Faculty of Mechanical Engineering, Belgrade
  • Vladan Galebović, SMEITS, Belgrade
  • Miloš Ivošević, Faculty of Mechanical Engineering, Belgrade
  • Jelena Janevski, Ph.D., Faculty of Mechanical Engineering, Niš
  • Aleksandar Jovović, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Milica Karanac, Ph.D., Innovation Centre of the Faculty of Technology and Metallurgy, Belgrade
  • Nikola Karličić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Biljana Miljković, Ph.D., Faculty of Technical Sciences, Novi Sad
  • Marko Obradović, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Ivona Radović, Ph.D., Faculty of Technology and Metallurgy, Belgrade
  • Jelena Salević, SMEITS, Belgrade
  • Miroslav Stanojević, Ph.D., Faculty of Mechanical Engineering, Belgrade (chairman)
  • Dragana Škrbić, NELT, Belgrade
  • Nikola Tanasić, Ph.D., Tehnikum Taurunum Zemun
  • Dušan Todorović, Faculty of Mechanical Engineering, Belgrade
  • Marta Trninić, Ph.D., Faculty of Mechanical Engineering, Belgrade
  • Jelena Uljarević, Ph.D., Innovation Centre of the Faculty of Technology and Metallurgy, Belgrade

Honorary Committee

  • Momir Antonić, Gasteh, Inđija, Serbia
  • Yagiz Akbiyik, Haci Ayvaz, Turkey
  • Prof. Martin Bogner, Ph. D., Faculty of Mechanical Engineering, Belgrade
  • Prof. Rade Doroslovački, Ph. D., Faculty of Technical Sciences, University of NOvi Sad, Novi Sad, Serbia
  • Dušan Durković, Grundfos Srbija, Belgrade
  • Branislava Duvančić, Robert Bosch, Belgrade
  • Prof. Goran Jankes, Faculty of Mechanical Engineering, University of Belgrade, Belgrade
  • Doc. Miroslav Kljajić, Ph. D., Department for Energetics and Process Engineering, Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia
  • Ilija Kovačević, Proing, Belgrade
  • Prof. Goran Kvrgić, Ph. D., Faculty for Management, University "Union - Nikola Tesla", Sremski Karlovci, Serbia
  • Prof. Dobrica Milovanović, Faculty of Engineering, University of Kragujevac, Kragujevac, Serbia
  • Darko Marinković, TDM, Belgrade
  • Prof. Biljana Pajin, Ph.D., Faculty of Technology, University of Novi Sad, Novi Sad, Serbia
  • Bojan Pavković, Ph.D., Colonel, Military Technical Institute, Belgrade, Serbia
  • Bojan Sretenović, Ovex inženjering, Belgrade
  • Prof. Milija Suknović, Ph. D., Faculty of Organizational Science, University of Belgrade, Belgrade
  • Dragana Šantovac, CWG Balkan, Belgrade
  • Andrej Škorc, Sipatec Building, Belgrade
  • Prof. Radivoje Topić, Ph. D., Faculty of Mechanical Engineering, University of Belgrade, Belgrade
  • Prof. Petar Uskoković, Ph. D., Faculty of Technology and Metallurg, University of Belgrade, Belgrade

Thematic fields

1. Process technologies

Petroleum, chemical and petrochemical industry; ferrous and non-ferrous metallurgy; non-metal mineral processing; industry of plastic materials; industry of building materials; industry of fireproof and thermal insulation materials; wood pulp and paper industry; pharmaceutical industry; food processing industry; production of alcoholic and non-alcoholic beverages; animal feed production; production of artificial fertilizers and agricultural chemicals; tobacco industry; textile industry; rubber industry.

2. Design, construction, operation, and maintenance of process plants

Design of process plants; construction of process plants; commissioning; operation and maintenance of process plants; function and safety testing; automatic management and control systems; information technologies in design and management of process plants.

3. Basic and ancillary operations, apparatus, and machines in process industry

Thermal (heating, evaporation, condensation, cooling, melting, etc.); diffusion (distillation, rectification, adsorption, absorption, crystallisation, extraction, drying, etc.); mechanical (grinding, milling, sieving, classification, briquetting, tableting, etc.); hydromechanical (sedimentation, filtration, centrifugation, dedusting, mixing, etc.); biochemical and chemical operations (fermentation, oxidation, reduction, etc.); ancillary operations and equipment (transport, storing, packaging, etc.); apparatus and machines, pipelines, and reinforcements.

4. Energy in process industry

Energy efficiency in technological processes; use of renewable energy sources.

5. Environmental engineering and sustainable development in process industry

Environmental protection, protection of work environment; circular economy in environmental protection; waste material management in process industry; solutions for reduction of GHG emissions from process industry.

6. Processes and plants in water preparation and purification in process industry

Treatment of water for various applications in process industry; wastewater purification in process industry.

7. Drying and dryers

Drying processes and equipment; conventional and new drying technologies; drying process control and management, energy efficiency, environmental impacts; dryers in food processing industry, dryers in non-metal industry, wood dryers, etc.

8. Gas engineering

Fuel gases; technical and medical gases; production and application.

9. Modelling and optimization of process plants and thermal power plants

10. Measurements and control in process industry

Base physical quantities and units in process industry; legislation and standardisation in the field of measuring and testing; measuring for the purpose of process control, operation, and automatic management; measurement systems (sensors, transducers, actuators; organisation of complex measuring systems with data acquisition.

11. Quality management and standardisation in organisations

Quality management systems and related, standardised management systems – environment, food safety, occupational health and safety, information safety, risks, etc.; Integration of an organisation’s system management; methods, techniques and tools in quality planning, management, improvement, and provision, and in related systems of an organisation’s management; standardisation, metrology, and quality control; accreditations, verifications, assessments, and certifications of management system of an organisation; quality culture and quality strategy in production and service rendering organisations.

Round table 

  • Within Processing’19, the Round table on Processing industry in challenges of climate changes will highlight and discuss topics that are today in focus of processing industry, including increasied usage of RES, rational consumption of energy with reduction of harmful gases emission:
  • using biomass, hydroenergy and solar energy and its impact on environment;
  • waste as energy source, technical and technological characteristics of waste treatment and thermic processing and co-processing, and
  • carbon dioxide emissions from industrial facilities. 

Congress fee

The full congress fee is 8,000 dinars, while for SMEITS members the fee is 6,400 dinars (VAT included). The fee includes the congress material, welcome cocktail attendance, formal lunch attendance, etc.

Presenting author is exempted from congress fee.

Information for authors

The Proceedings including summaries of all the accepted papers will be printed in Serbian and in English.

After Processing’19, the Proceedings will receive its CIP and ISBN. The original presented papers can receive DOI (digital object identifier), which provides higher visibility and citation benefits.

A number of original papers presented at the congress will be proposed for publishing in the following journals: “FME Transactions“ – a scientific journal of the Faculty of Mechanical Engineering of Belgrade, which is on Web of Science (WoS), Emerging Sources Citation Index (ESCI) list, and the journal “Procesna tehnika“ (M53), with a possibility to receive DOI number. The paper application should be sent to the organiser to procesing@smeits.rs and it must include: 

  • The proposed topic and summary (abstract) in English and in Serbian;
  • The list of authors with affiliations in English and in Serbian, and contact details;
  • A summary (abstract) of maximum 1000 characters in English and in Serbian;
  • CV of the first author.

Authors can send applications and present their papers as follows:

Presentation within the programme, a summary in the printed Proceedings and a full-length paper in the Proceedings on the website: SMEITS publications

Presentation on a poster (poster session) a summary in the printed Proceedings and a full-length paper in the Proceedings on SMEITS website:

Presentation within the programme and a summary in the printed Proceedings

 

Dates and deadlines

  • The proposed topic of the paper and summary (abstract) should be sent to the organiser’s email address procesing@smeits.rs by 15th April 2019.
  • Authors will receive a notification on acceptance of their topic and the instruction for the preparation of the full-length paper by 20th April 2019.
  • The paper written on the accepted topic should be submitted to the Organizer for review by 1st May 2019.
  • Authors will receive a notification on acceptance of their paper or a need for a revision by 10th May 2019.
  • Presentations of papers should be submitted by 25th May 2019.

Official languages

The official languages of Processing’19 are English and Serbian. Papers should be preferably submitted and presented in the English language. Simultaneous translation will not be provided.

Student Programme

Students will present their papers within a special session and the author of the best paper will be awarded.

Call for sponsors

The Organizer invites all interested companies and organisations to be sponsors of Processing’19 and to enter into sponsorship agreements as soon as possible in order to be entitled to the congress fee payment in monthly instalments. 

  • The sponsor’s rights include:
  • The sponsor’s name and logo will be printed in the appropriate, noticeable section in the final programme and congress invitation.
  • The sponsor’s name or logo (50x50 cm) will be displayed at the central place of the hall during the congress.
  • The sponsor’s name or logo as well as its one-page colour advertisement will be printed in the Congress Proceedings and in two issues of the journal “Procesna tehnika” in 2019.
  • At the exhibition within the congress, the sponsor will be entitled to an arranged exhibition area free of charge.
  • Three professionals from the sponsor’s company or organization will be entitled to participation in the congress free of charge.
  • The sponsor will be entitled to give a 10 minute presentation of its business programme or new products to the congress attendees. The topic of that presentation will be included in the printed programme of the congress. the sponsor’s presentations will be posted at the SMEITS YouTube channel.
  • The sponsor will be entitled to distribute prospectuses, catalogues, and other professional and information material to the congress attendees.

undefined

Generalni pokrovitelj  
49. kongresa o KGH 


undefined


Pokrovitelj izložbe u okviru
49. kongresa o KGH